How to upgrade Centauri via FTP

1. Steps to execute with any ftp program

1.1 Change the Centauri address according the subnet mask of your ip network. 
1.1.1 Via frontpanel with menu item <Setup/Network/Address>
1.1.2 With terminal emulation command 'ip_address <ip address>'

1.2 Login in to your Centauri
1.2.1 Login name: Admin
1.2.2 Password: Power

1.3 Activate binary transfer mode

1.4 Copy the refering *.upd file to the main directory of the partition d: of Centauri:

1.5 Rename the *.upd file to (if necessary):
1.5.1 Centauri 2000: ip2000.upd
1.5.2 Centauri 2001: ip2001.upd
1.5.3 Centauri 3000: ip3000.upd
1.5.4 Centauri 3001: ip3001.upd

1.6 Reboot your Centauri and wait a few minutes

2. Steps to execute with Centauri remote

2.1 Conditions
2.1.1 Centauri remote control with version 1.1.0.60 or later
2.1.2 Centauri must be controlled via IP (not RS232)

2.2 Step to menu item <Expert/Update Centauri via FTP>
Note: If you forget the your super user password, please consult the readme of the 
Centauri remote.

2.3 Press the OK button in the dialog 'Update Centauri via FTP'.

2.4 Select the appropriate update file (suffix *.upd). All other steps will be executed 
automatically.    

e (suffix *.upd). All other steps will be executed 
automatically.