This facility is ONLY AVAILABLE when communicating with 
using IP.
First, it downloads the files
| • | logact.txt |
| • | logold.txt |
from the Flash-card USER partition, using FTP. These files are then interpreted, and the resulting single file is automatically saved as lognew.txt, which is then displayed.
Display Log File dialog:
By using Expert/Options the user can determine if the displayed log file should be ‘detailed’ or not.
The ‘normal’ default log file simply records the start and end of a transmission.
The ‘detailed’ log records additional information about:
| • | syncer |
| • | Start and stop of the internal encoder and decoder |
| • | Alarm indications |
| • | Telegram informations |
| • | Framing informations |
| • | Update informations |
| • | Any Dial in protection informations |
etc.
Note:
It is possible to display the original log lines by right mouse click on the display field. A pop up menu is open which enables the following selection:
| • | Log.txt (i.e. original log lines) |
| • | Lognew.txt (i.e. interpreted log lines) |
Pressing the F2 button displays the meaning of the shortcuts of the original log lines.