codec_name_arial16bold_001 Hardware

 Top  Previous  Next

- shows the hardware modules CODEC_NAME_ARIAL12_001 has detected on boot-up.

 

codec_name_arial12_001 hardware dialog:

 

hardware002

 

This dialog is also displayed when the CODEC_NAME_ARIAL12_001 Remote Control program starts (see menu item Expert/Options).

 

Items:

 

•codec_name_arial12bold_001 Series:
this Remote Control program is designed to control 200x, 300x, 330x and 400x CENTAURI codecs. A special version of the Remote Control software exists for CENTAURI 3500. For more info, please contact support@mayah.com.
•Number of available B channels:
- only available if codec_name_arial12_001 has an ISDN card.
Possible values:
- CENTAURI 2000/2001: 0, 2 or 4 (i.e. 0, 1 or 2 BRI)
- CENTAURI 3000/3001: 0, 2, 4 or 8 (i.e. 0, 1, 2 or 4 BRI)
- CENTAURI 4000/4001: 0, 2, 4 or 8 (i.e. 0, 1 or 4 BRI)
- MERKII: 2, 4 or 8 (i.e. 0, 1 or 4 BRI)
- GANYMED 1102: 0
•Number of installed X.21 cards:
Possible values: 0 or 1
•Number of installed network cards:
Every CENTAURI (even a CENTAURI 2000/2001) has an electrical network interface. In addition, there is the option of a second network card (electrical or optical) for CENTAURI 300x, 330x and 400x models.
If a codec_name_arial12_001 has two interface cards, then the IP Remote Control will be via the first interface (network) card, and IP audio via the second network card.
If a network card is not detected, codec_name_arial12_001 will show an alarm.
Possible values are:
- CENTAURI 2000/2001, MERKII, GANYMED 1102: 1
- CENTAURI 3000/3001: 1 or 2
- CENTAURI 3300/3301: 1 or 2
- CENTAURI 4000/4001: 1 or 2
•Number of installed flash cards:
Possible values: 1
•Kind of LCD displays:
Possible values:
- CENTAURI 2000, CENTAURI 3000, CENTAURI 3300, CENTAURI 4000, GANYMED 1102: No
- CENTAURI 2001, CENTAURI 3001, CENTAURI 3301, CENTAURI 4001: ISA or USB
- MERKII: USB
•Number of installed headphone ports:
This field just informs if one or more headphone ports are available (=1) but it does not inform about the real number of headphone connectors.
Possible values:
- CENTAURI 2000, CENTAURI 3000, CENTAURI 3300 and CENTAURI 4000: 0
- CENTAURI 2001, CENTAURI 3001, CENTAURI 3301, CENTAURI 4001 and MERKII: 1
 

Note:

The parameters shown in this dialog cannot be changed except by installing new codec_name_arial12_001 hardware. Such a hardware upgrade should only be done by the Mayah factory.

For more information, please contact your local Dealer, or Mayah Communications, via info@mayah.com.