- lets the user define a Remote Access restriction for IP and/or ISDN control.
Set IP/ISDN Password dialog:
This menu is only visible and enabled provided:
| • | RS232 control is used, and |
| • | Item IP/ISDN Password is checked in menu item Expert/Options |
If either IP- or ISDN-control is active, this option is NOT available but if
| • | Item IP/ISDN Password is checked in menu item Expert/Options and |
| • | Remote is started with IP or ISDN control |
then first a dialog asks for
| • | user and |
| • | password |
Both of these must be correctly entered to gain Remote Control access to a 
.
The factory default setting is for both the user and password strings to be empty.
Please note: both entries are case-sensitive!