|
- enables the ‘additional functions’ in CENTAURI 300x, CENTAURI 330x and CENTAURI 400x, using a key code. Previously enabled functions are also checked.
Set key code dialog:

Additional functions:
Algorithms:
| • | Linear: Enables linear audio via IP |
| • | AAC (LD): Enables MPEG4 AAC Low Delay algorithm |
| • | 4SB ADPCM: Enables 4SB ADPCM algorithm |
| • | AAC (HE): Enables AAC (HE) algorithm |
| • | MP3 Pro: Enables MP3 Pro algorithm |
| • | APT-X: Enables APT-X and APT-X no sync. algorithms |
| • | Enhanced APT-X: Enables enhanced APT-X algorithms with 16, 20 and 24 bit |
| • | AES/EBU transparent: Enables transparent streaming of a AES/EBU digital audio signal |
| • | DRM: Enables AAC+SBR algorithm for DRM ( = Digital Radio Mondial); only available for DRM Encoder |
Protocols:
| • | SNMP: Enables Simple Network Management Protocol |
| • | DHCP: Enables Dynamic Host Configuration Protocol |
| • | NTP: Enables Network Time Protocol |
Modes:
| • | MC APT: Enables multi channel mode for APT-X algorithms |
| • | MC Linear: Enables multi channel mode for linear audio |
| • | MC AAC (MPEG4): Enables multi channel mode for AAC (MPEG4) algorithm |
| • | MC AAC (HE): Enables multi channel mode for AAC (HE) algorithm |
Others:
If an item is checked it has been enabled.
How to enable additional functions:
| • | Contact your local dealer or Mayah communications for the key code of an additional function |
| • | Give the Serial Number of the which will use the additional function. |
| • | Enter the key code in the edit field ‘Key Code’ |
| • | Confirm the key code by clicking OK |
If this was successful, the new function is ‘checked’, and is enabled
Note:
| • | Additional functions are not free! Coding algorithms are licensed software, and each key translates to a (royalty) licence payment for the use of the algorithm. |
| • | Key codes are calculated using the S/No of the , and can only be used by that unit. |
Please contact your local Mayah dealer, Mayah Communications or info@mayah.com to get the current prices.
|