Language Request Dialog at start

At first start of remote control the following dialog is shown:

Language_Selection_001

This dialog enables to:

•	to select the language of the remote control.

•	to set the remote control parameters for - RS232 control - IP Control

This dialog is not shown at start if

•	the ‘Don’t show again’ box was activated in a remote session before. However, language request dialog can be reactivated for next remote session by remote menu item <Settings/Select Language at start>.

•	command line parameters with language selection are used (see chapter Miscellaneous/Command Line parameters.

Note:

If command line parameters are used without language selection then a reduced language request dialog is shown without the possibility to set remote parameters.

Reduced language request dialog:

Language_Selection_Reduced_001

Elements of language request dialog:

Language

Here the language can be selected to:

•	English (context sensitive help included)

•	German (context sensitive help included)

•	French (no context sensitive help)

•	Italian (no context sensitive help)

•	Rhaeto-Romanic (no context sensitive help)

Don’t show again

When this box is checked the language request is no more shown at start. However, language request dialog can be reactivated for next remote session by remote menu item <Settings/Select Language at start>.

Set remote parameters

When this box is checked the enhanced language request dialog is shown. The enhanced dialog enables to set remote control parameters for RS232 and IP-control. Furthermore a desktop shortcut can be created.

Interface

Here the remote interface can be set to:

•	RS232 Control via RS232 serial port (com port)

•	IP Win socket IP control connection

Port

The content of this list box is context sensitive.

•	At RS232 control: List of available RS232 Com ports of the control PC

•	At IP control Number of the port of the win socket. By default this parameter is set to 2000.

IP Addr./Baudrate

The content of this list box is context sensitive.

•	At RS232 control: Here the RS232 baud rate can be set to: - 9,600 - 19,200 - 38,400 (default and recommended) - 57,600 - 115,200 Note: This settings must correspond to the one of . Therefore usually 38,400 is the best choice.

•

At IP control
Here the IP address of the

can be entered. This remote program saves the last 200 entered IP-addresses. The last controlled IP address in shown in the text field.
Furthermore with click of right mouse button a popup menu is shown which starts a UDP scan. A UDP scan sends out a general broadcast (255.255.255.255) and partial broadcasts (e.g. 10.0.0.255) to find all MAYAH codecs in the network. The found Mayah codecs replaces the old list. However, many networks devices (e.g. routers) blocks a broadcast. Therefore usually just the LAN can be scanned.

Desktop shortcut

Here a desktop shortcut of remote control can be created automatically. The following items can be selected

•	No No desktop shortcut is selected

•	Yes (no rmt params) Just a desktop shortcut of remote control is created but without any command line parameters.

•	Yes (rmt params) The target property of the desktop shortcut includes command parameters for - language selection - remote parameters according to the selection in this dialog. For more info about command line parameters please consult chapter Miscellaneous/Command Line parameters.