- saves 
’s most important settings. However, which configuration settings are stored depends on the hardware detected.
For example, the ISDN configuration will only be saved if any ISDN hardware is detected in .
The .ctr file created consists of commands, as described in the Communication Reference manual (www.mayah.com/content/download/pdfs/manuals/communication-reference_man.pdf). These commands can also be used via Expert/Direct Command.
Save Settings dialog:
The .ctr file created above can be re-loaded into a using Load 
File.
Note:
Exactly which configuration items are saved is determined by the following ASCII-files:
- script_general_settings_001.txt or script_general_settings_002.txt
- script_ip_settings_001.txt or script_ip_settings_002.txt
- script_isdn_settings_001.txt or script_isdn_settings_002.txt
- script_x21_settings_001.txt or script_x21_settings_001.txt
It is MANDATORY that all these files are located in the sub directory ‘script files’ of the Remote Control program, to prevent an error occurring.
The script files ending with ‘002.txt’ are used for 
with system software version >= 2.1.0.0.